Screen Print Transfer Pressing Instructions (commercial style heat press)

• 325 degrees for 7 seconds (white or clear film single color)
• 325 degrees for 10-15 seconds full color clear film
• 350 degrees for 7 seconds PUFF PRINTS
• HEAVY EVEN PRESSURE
• No teflon sheets, butcher paper, or any covers
• Hot Peel, immediately peel the transfers when heat is removed
• SECOND PRESS IS NOT REQUIRED

Screen Print Transfer Pressing Instructions (Cricut Easy Press)

• 350 degrees for 30 seconds
• HEAVY EVEN PRESSURE (use body weight)
• No teflon sheets, butcher paper, or any covers
• Hot Peel, immediately peel the transfer when heat is removed

For video instructions visit our official Instagram page @reivajblanks

Washing & Caring instructions for Screen Prints

Caring for your heat transfer decorated garment is simple and if applied and cared for properly, will last the life of the garment. We recommend waiting at least 24 hours after pressing a garment to perform a wash / dry cycle.

• Washing the garment inside out is the best way to prevent premature wear and tear.
• Cold wash only and hang to dry or tumble dry
• All order come with pressing instructions

DTF Transfer Pressing Instructions (commercial style heat press)

• Press at 320°F for 15 seconds under medium - heavy pressure depending on your press. (note that every heat press is different, yours may need to be set a little higher or lower).
• Cold Peel (Let transfer completely cool while still attached to garment.)
• Peel slowly and carefully.
• 2nd Press: Cover the image with Teflon or parchment sheet, 320°F for 3-5 seconds under medium pressure.

DTF Transfer Pressing Instructions (Cricut Easy Press)

• 350°F for 30 seconds
• HEAVY EVEN PRESSURE (use body weight)
• Let transfer completely cool while still attached to garment.
• Peel slowly and carefully.
• 2nd Press: Cover the image with Teflon or parchment sheet, 350°F for 5-10 seconds under medium pressure.

For video instructions visit our official Instagram pages @reivajdesignessentials & reivajblanks

Washing & Caring instructions for DTF Transfers

Caring for your heat transfer decorated garment is simple and if applied and cared for properly, will last the life of the garment.

• Wait 24 hours before first wash
• DO NOT Dry Clean
• Cold or Warm water for the wash cycle
• Dry on low or hang dry.
• Do not iron directly on transfer
• No bleach or fabric softeners
• All orders come with pressing instructions

Application Instructions for UV-DTF

• Make sure your substrate is clean and DRY. (We recommend washing your cups/surfaces with dish soap and water, DO NOT USE ACOHOL TO PREP YOUR SURFACE).
• Before removing the backing, scrape the design with a squeegee to ensure the entire design transfers to the clear film correctly.
• Fully peel or partial peel your transfer (whichever works for you)
• Line to the transfer onto your glass cup or surface to your liking, PLEASE REMEMBER the adhesive is extremely strong. This means once the transfer sticks its almost impossible to take off.
• Once design is placed, use a squeegee over the entire design to push any air bubbles out.
• Heavily rub the entire design a few times to ensure everything is adhered correctly.
• Slowly peel the clear film off and you're done!

For video instructions head to our Instagram @reivajdesignessentials

Care & Washing Instructions for UV-DTF

UV-DTF transfers are permanent adhesive that are waterproof.

• NOT MICROWAVE SAFE
• NOT DISWASHER SAFE
• DO NOT SOAK
• NO HEAT REQUIRED TO APPLY

Sublimation Transfers 20oz Tumbler

SUBLIMATION PRESSING INSTRUCTIONS

YOU MUST HAVE KNOWLEDGE ON SUBLIMATION WHEN PURCHASING THESE TRANSFERS.  

• Set press to 360-370 degrees for 60 secs depending on your press
• Wrap transfer to substrate
• High pressure
• Cover with parchment paper.
• Press for 60 secs each sided and 10 sec at each end rotation 2-3 times to prevent ghosting.
• Peel off and you are done

We are not responsible for any application mistakes, all of our sublimation transfers are printed on a professional sublimation printer, with high quality sublimation paper and inks.

Iron On Patches (Chenille & Others) Pressing Instructions:

• Sequins Patches
  Set heat press to 325-350 degrees on medium - heavy pressure.
  Lay patch on garment, cover with a Teflon/butcher paper and press for 25 seconds.
  Turn garment inside out and press for 15 seconds WITH NO COVERS.
  Chenille Patches
  Set heat press to 330-350 degrees on heavy pressure.
  Lay patch on garment, cover with a Teflon/butcher paper and press for 25 seconds.
  Turn garment inside out and press for 15 seconds WITH NO COVERS.
  Iron On Patch Washing Instructions
  Iron on patches are permanent, we recommend you do not use laundry softener when washing.

Spangle Transfers

• Pre-press garment for a few seconds to remove all the moisture.
• Turn your transfer upside down (design facing down) & peel backing off. If any spangles move, adjust with tweezers before pressing.
• Heat press onto garment at 320 degrees for 10 seconds with HEAVY pressure.
• Once pressed, rub the top of the transfer with a piece of your garment or a heat resistant glove to ensure the entire design adheres. CAUTION IT WILL BE HOT.
• Remove the clear film while WARM, this clear film is sticky and will require a stronger pull.
• And there you go you can enjoy your beautiful design.

We are not responsible for any application mistakes with any of your products.

For video instructions visit our official Instagram pages @reivajdesignessentials & reivajblanks